mikkeli
cce9711119
obd-poller drops its CAN socket: the Z27AG answers OBD-II only on ISO 9141-2. It holds a raw RFCOMM link to the ELM (no pairing, no root), fixes the protocol (ATSP3) so nothing probes CAN, publishes the obd_* signals, and releases the adapter after a minute of ECU silence so it can sleep. gnss: gpsd's fix as yukart/gnss/<signal>. orin-status: elm_connected from BlueZ. One native deploy script (deploy-native.sh BIN) behind the per-service ones; /etc/default/yukart-elm holds the adapter's address. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DDwfd6Ki8UfG4hK6W5YpJz
type
| type |
|---|
| reference |
Core services
Part of Project Yukart, making an old 2008 Mitsubishi Z27AG a bit smarter with modern technologies.
This file serves as the minimalist portal to other docs
What this repo is about
The acquisition and processing cluster on the Orin, developed and deployed as one
unit: recorder, decoder, gnss, orin-status and obd-poller now; can-bridge as it is
needed.
| Binary | Installed as | Does |
|---|---|---|
recorder |
yukart-recorder.service |
Raw CAN + GNSS to disk, in sessions, under a storage bound; every yukart/vehicle/* value (decoded and OBD-II) beside them |
decoder |
yukart-decoder.service |
The car's own broadcast frames to named signals (yukart/vehicle/*): every z27ag signal in contracts' signals.json, laid out by its can block. Booleans on change, numbers ≤ 20/s, each refreshed once a second; reads only |
bus-bench |
not installed: a test tool | Raw CAN and decoded-signal load over MQTT, measured: loss, latency, broker CPU (report) |
obd-poller |
yukart-obd-poller.service |
OBD-II mode 01 on the K-line through the Bluetooth ELM327 (address in /etc/default/yukart-elm), the single writer to the car; never on CAN. The obd_* signals, calibration references (yukart/vehicle/*): rpm, speed, throttle, load, MAF, timing, O2 every round; temperatures and trims every 5 s. Lets go of the adapter after a minute of ECU silence |
gnss |
yukart-gnss.service |
gpsd's fix as single values on yukart/gnss/*: fix, speed, heading, position, altitude, satellites |
orin-status |
yukart-orin-status.service |
The Orin's health on the bus, once a second: temperatures, CPU/GPU load, memory, power, fan, WiFi (with SSID)/LTE/tablet links, the CAN interface, the ELM's Bluetooth link, UPS battery (yukart/host/*) |
scripts/deploy-recorder.sh # build, glibc check, install on the car Orin
scripts/deploy-native.sh BIN # build BIN on the development Orin, glibc check, install;
# deploy-{decoder,gnss,obd-poller,orin-status}.sh wrap it.
# Redeploy after any contracts signals.json change
yukart-decoder --list # the signals it decodes, and where
zstdcat can-*.log.zst | yukart-decoder --replay # what it would publish for a recording
yukart-obd-poller --elm ADDR --once # on the Orin, service stopped: adapter, protocol,
# supported PIDs and one value each
yukart-gnss --once # the next fix as JSON, no broker
yukart-orin-status --once # on an Orin: one reading as JSON, no broker
yukart-recorder ctl status # on the Orin
yukart-recorder ctl start "cold start" # manual session, ends only on stop
yukart-recorder ctl mark "indicator left on"
yukart-recorder ctl stop
Recordings live in /var/lib/yukart/recordings/, one directory per session —
layout in the initial plan.
- For implementation practice guidelines, refer to the guidelines;
- For implementation plans and history, refer to them;