orin-nano-env-setup/docs/impl/reports/DEVICE-NAMING.md

type, date

type	date
report	2026-10-08

Stable Device Naming: CAN Interfaces and SIM7600 Ports

Problem

Kernel names come from registration order. That order isn't stable, so anything configured as can1 or ttyUSB3 can point at a different device after a reboot or replug.

• CAN: mttcan (onboard) and pcan (USB, via /etc/modules) both load at boot. The canN names go to whichever registers first, so the PCAN adapter can end up as can0 and the onboard controller as can1.
• SIM7600: five ttyUSB* ports. Their numbers shift if another USB-serial device enumerates first.

Result

Device	Identified by	Stable name
Onboard MTTCAN	platform device c310000.mttcan	can_onboard
PEAK PCAN-USB	USB 0c72:000c	can_pcan
SIM7600 NMEA port	USB 1e0e:9001, interface 01	/dev/sim7600-gps (symlink)
SIM7600 modem	ModemManager simtech plugin (USB IDs and per-interface port probing)	n/a, nothing configured by port name
SIM7600 data	NetworkManager povo connection with ifname '*'	n/a, follows whatever modem ModemManager exposes

can_onboard was verified with a live rename (mttcan c310000.mttcan can_onboard: renamed from can0). can_pcan was checked against the driver source only, because the adapter wasn't plugged in. To do: plug the adapter in and confirm with ip -br link.

CAN: /etc/udev/rules.d/70-can-names.rules

SUBSYSTEM=="net", ACTION=="add", KERNELS=="c310000.mttcan", NAME="can_onboard"
SUBSYSTEM=="net", ACTION=="add", ATTRS{idVendor}=="0c72", ATTRS{idProduct}=="000c", NAME="can_pcan"

• Both interfaces get names outside the kernel's canN pool. Renaming only the PCAN and pinning the onboard controller to can0 would race: if pcan registers first, it briefly holds can0 and the onboard rename collides.
• Underscores rather than hyphens: systemd escapes - in device unit names (sys-subsystem-net-devices-can\x2dpcan.device).
• The file must sort before 80-net-setup-link.rules, which only assigns a name when NAME is still empty.
• PCAN matching relies on the netdev's sysfs parent being the USB interface. In PEAK 9.2.0, pcan_netdev.c calls SET_NETDEV_DEV(ndev, pcandev_to_dev(pdev)), and for USB devices that returns &usb_intf->dev, so ATTRS{idVendor} matches.
• PEAK's own assign= module parameter (peak, devid, pcanX:canY) can only produce canN names, so it doesn't avoid the race.
• More than one PCAN-USB: both would match can_pcan, and the second rename would fail. Give each adapter a device ID (PEAK tools: pcan-settings), then add a per-ID match and distinct names.

Apply without a reboot (interface must be DOWN):

sudo udevadm control --reload
sudo udevadm trigger --action=add /sys/class/net/can0

Usage: sudo ip link set can_pcan up type can bitrate 500000 && candump can_pcan. Generic detection still works: ip -d link show type can lists both regardless of name.

SIM7600: why no further rules are needed

• ModemManager identifies the modem by USB ID and probes each port, which gives it the (at), (gps), (qmi) and (net) roles. It never relies on a ttyUSB number.
• NetworkManager binds the povo GSM connection to the ModemManager modem object (ifname '*'), not to a device node.
• gpsd is the only consumer of a raw port, and it uses the /dev/sim7600-gps udev symlink (/etc/udev/rules.d/99-sim7600-gps.rules, matching ENV{ID_USB_INTERFACE_NUM}=="01").
• ttyUSB2 is mentioned in the SIM7600 report only for manual AT sessions. ls -l /dev/serial/by-id/ shows the stable path (...-if02-port0) if numbering ever shifts.

Affected references

• PCAN setup report: its can0/can1 examples are from before this change.
• halogen-workstation-roadmap phase 17 lists "presence of can0" as a CAN heuristic. That heuristic is now false on this host; ip -d link show type can still works.