CAN-BITRATE: obd-poller disabled (no OBD on CAN); adapter stays acknowledging

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DDwfd6Ki8UfG4hK6W5YpJz
2026-10-13 17:50:30 +09:00
parent df84b1570f
commit bfd45a8508
1 changed files with 3 additions and 0 deletions
@@ -26,6 +26,9 @@ Persisted (boot and hot-plug):
 (svc-core), the single writer: the adapter now acknowledges frames like any scan tool. To go back, set
 `CAN_OPTS="listen-only on restart-ms 100"` there and replug the PEAK (or restart `can-up@can_pcan`).

+obd-poller is **disabled since 2026-10-13**: the Z27AG's ECU never answered OBD-II on CAN (most likely K-line, pin 7,
+not wired). The adapter was left acknowledging anyway, as harmless at the measured bitrate.
+
 ## Goal

 Find the bitrate of the bus reachable at the OBD port of the Mitsubishi Colt (Z27AG), then make `can_pcan` come up with it automatically.