Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DDwfd6Ki8UfG4hK6W5YpJz
This commit is contained in:
@@ -42,8 +42,23 @@ Ralliart's 4G15T is also the forfour Brabus engine, and parts listings show the
|
||||
sharing reaches the electrics (Z30 engine ECUs carry Mercedes-style `A135…` part
|
||||
numbers; the steering rack is the 454's). The forfour notes bear that out for the
|
||||
body bus. Their layouts are the first hypothesis for every shared ID, and their
|
||||
engine-side IDs a hint of what a petrol forfour or EU Colt would add. A forfour
|
||||
1.5 Brabus or a CZT capture would be the true sibling; none is public. The smart
|
||||
engine-side IDs a hint of what a petrol forfour or EU Colt would add.
|
||||
|
||||
**The forfour Brabus is the sibling to look for.** EcuTek's [Colt CZT tuning
|
||||
manual](https://ecutek.zendesk.com/hc/en-gb/article_attachments/204299089/Mitsubishi_Colt_CZT_-_Tuning.pdf)
|
||||
(2005-on "CAN ECUs"): "The Smart ForFour Brabus edition is basically a Colt CZT
|
||||
with the fibreglass body"; one ProECU package tunes both. Brabus owners run CZT
|
||||
ECUs (MH8304F; ECUFlash definitions exist for CZT ROM 47110032 and Brabus
|
||||
49100033, [EvolutionM](https://www.evolutionm.net/forums/ecu-flash/767782-xml-file-smart-brabus-w454.html)).
|
||||
So a Brabus's engine-ECU frames should be ours (if the JDM Ralliart's ECU
|
||||
matches the EU CZT's), while its body frames come from smart's SAM module: on the
|
||||
454 "the SAM … sits at the awkward edge of Mitsubishi engine management and
|
||||
Mercedes body electronics" ([smartcarmanuals](https://smartcarmanuals.com/models/454-forfour/)).
|
||||
Expect, from a Brabus capture: engine frames equal, chassis frames (ABS, the shared
|
||||
electric steering) probably equal, body frames different. No Brabus or CZT capture
|
||||
is public; asking an owner for a minute of `candump` at the OBD port is the cheap way
|
||||
to get one. The same manual notes that the **Euro CZT has no MAP sensor**, so OBD PID
|
||||
`0B` may be unsupported on the Z27 (`obd-poller` discovers that by itself). The smart
|
||||
fortwo 451 ([hackaday.io](https://hackaday.io/project/19931-smart-fortwo-can-bus-reverse-engineering))
|
||||
shares `423` as the cluster status frame, little else.
|
||||
|
||||
|
||||
Reference in New Issue
Block a user