Colour was 35 call sites and ~29 distinct literals spread across four widget
files, with no egui Style or Visuals set at all - so the hand-painted widgets
were hand-coloured while ParamSlider and the labels sat on stock egui defaults,
which is most of why the UI did not read as one thing.
The audit turned up more than duplication. Two different panel blacks
((16,16,20) and (20,20,24)) for the same intended surface; three reds, two
greens and two blues close enough to look like mistakes; eight greys doing
about four jobs. And a genuine collision: blue/green/orange meant LOW/MID/HIGH
in the crossover and input/output/gain-reduction in the scope, so orange meant
"the high band" in one widget and "gain reduction" in the one beside it.
The rule that resolves it, and that the module documents: channel hue is
chrome, functional colour is data. A pixel showing a value comes from the
functional palette and means the same thing in every channel; a pixel saying
which channel you are looking at comes from that channel's hue and never
touches the data. The scope turns out not to need arbitration at all - it is
tabbed, one channel at a time, so its three traces never compete with a hue.
Two tiers. Seeds are a short hand-picked list: four channel hues, the
functional colours, six neutrals. Everything else derives from a hue via
`channel()`, so recolouring a channel is one constant. Derivation is const fn -
including the HSV conversion, written out because ecolor's is not const - so
the whole table is built at compile time and costs nothing at runtime.
Chosen so the hues describe the colours already in use: the derived crossover
strips land within 1-3 units of the literals they replace. The two drag handles
shift by ~17 on one channel, being now consistently saturated with the rest.
Also lands the one deliberate visual change: the meter's four cells were
identical and distinguishable only by the label underneath, which is where
channel identity was hardest to read. They now carry a dark channel wash and an
accent rule, while the bars stay strictly functional.
Visuals are wired from the same seeds in the editor's build closure, so egui's
own widgets stop looking foreign. meter.rs's local level_color is gone; the
palette owns the headroom ramp rather than there being two places to edit it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LU1NRL7fAaZTtFMTTPn2b1
Retires the working codename now rather than at 1.0, because the two identity
constants a DAW uses to recognise a plugin across sessions can only be changed
for free while nothing has saved a project with it. Verified: zero references
to the plugin across all 69 FL project backups, under any identity string.
Derived spellings:
Cargo package codename_206 -> bari_206
bundle / DAW name Codename 206 |
206 prototype -> Bari 206 (unified; drops "prototype")
Rust types Codename206(Params) -> Bari206(Params)
CLAP_ID com.mikkeli.codename-206
-> org.novoyuuparosk.bari-206
VST3_CLASS_ID Codename206Maxi! -> Bari206Multiband
CLAP_ID moves to reverse-DNS on a domain actually controlled, and stops
disagreeing with a VENDOR that was already Novoyuuparosk. VST3_CLASS_ID stays
exactly 16 bytes and drops "Maxi", which sat close to Image-Line's Maximus and
Maximizer in the same product category.
Author identity converges on Mikkeli Matlock <mikkeli@novoyuuparosk.org>;
Cargo authors had been carrying a personal gmail address while Plugin::EMAIL
already used the org one. VENDOR stays Novoyuuparosk, which is the org rather
than the person, and copyright stays with the person.
Deliberately unchanged: the repo, its remote, the local directory and the
homepage URL all keep "codename-206". Renaming those buys nothing and costs a
Gitea rename, a remote rewrite and a directory move, so the bare "codename-206"
is current branding rather than residue - and is the one spelling the STALE
list must not contain.
Driven by check-branding.sh rather than by grep: setting the canonical block
listed all 26 sites, including .github/workflows/ci.yaml, which no explicit
check covered. That gap is now closed by a positive check on the CI bundle
command, so a future rename fails in seconds instead of after a full compile.
STALE now carries both the retired and the new spellings, so the next rename
is self-checking too.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LU1NRL7fAaZTtFMTTPn2b1
Migrated from musiikki/nih-plug-template, adapted for this repo: the
template gates VST3 behind an opt-in `vst3` feature and so builds twice,
while this plugin always ships VST3 (nih_plug is taken with its default
features), so one build covers both formats.
The branding check runs first because it needs no toolchain and finishes
in under a second, so a half-landed rename fails before a build is spent
on it. The bundle step is included because `cargo build` never exercises
the xtask bundler, and bundler.toml drifting from the crate name stays
invisible until you try to produce an artifact.
Performance is deliberately not gated. `Plugin::process()` cannot be
called from a test — `ProcessContext` requires a `&Transport`, whose
constructor and fields are `pub(crate)` to nih_plug — so any realtime
check would have to target the `src/dsp/` types directly, and a meaningful
one needs an audio deadline rather than a shared CI box.
Verified by running the exact step sequence as the gitea-runner user under
the service's environment: 28 branding checks, 20 unit tests, both bundles
produced.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WHt4DykxXaQnyaJfyS8KCn
Commit 057d630 switched this repo from GPL-3.0 to Apache-2.0, which the
build contradicts: src/lib.rs calls nih_export_vst3! unconditionally and
nih_plug is taken with default features, so every build links vst3-sys —
GPLv3-or-later by its own authors' choice. deploy.ps1 then installs that
binary. The declared licence and the artifact's actual terms disagreed,
and the original GPL-3.0 was correct.
Given the intent to distribute non-profit and open-source, GPL costs
nothing here, so this restores it rather than dropping VST3 to keep a
permissive licence.
Also adds the ISC notice owed to Robbert van der Helm: the plugin
scaffolding derives from the NIH-plug cookiecutter template and example
plugins, whose one condition is that the copyright and permission notice
travel with all copies. The README credited the template under Reference
Material, which is courtesy, not compliance. ISC is GPL-compatible, so the
notice is retained in NOTICE rather than superseded.
Corrects the README's claim that Steinberg's SDK licence must be accepted
before distributing. No SDK source is vendored or redistributed, so there
is nothing to accept at build time. The binding constraint is vst3-sys's
GPLv3; Steinberg's trademark in "VST" is a separate regime that no source
licence resolves.
Copyright in the Irene <irene@novoyuuparosk.org> commits is held by the
repository owner (an agent identity), so no third-party agreement was
needed for this relicense.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WHt4DykxXaQnyaJfyS8KCn
5 ms was too short to be an RMS average at all. Squaring the detector signal
puts a component at twice the fundamental, and a one-pole that does not span a
cycle passes it straight through, so the detector ripples and the gain
intermodulates with the bass. Measured peak-to-peak detector ripple at 5 ms:
30 Hz 50 Hz 80 Hz 120 Hz 200 Hz 500 Hz 1 kHz
4.42 2.72 1.72 1.15 0.69 0.28 0.14 dB
That lands squarely on the low band, whose crossover reaches down to 30 Hz,
and attack is allowed to go to 0 ms so nothing downstream is guaranteed to
mask it. Above ~500 Hz the same window was so short that RMS mode barely
differed from peak, making the mode switch do less than it appeared to.
The fix is per-band rather than one longer constant, because the required
window is set by how low the band reaches and a multiband already knows that.
Cost is response time (95% of a step: ~12 ms at 5 ms, ~117 ms at 50 ms), so
each band gets only what it needs:
LOW 50 ms 30 Hz ripple 4.42 -> 0.46 dB; slow is wanted down here anyway
MID 20 ms body without dulling the band carrying most transients
HIGH 10 ms nothing up there ripples, so stay responsive
ALL 35 ms full-band, so it has to cover the low content too
RMS_WINDOW_MS moves from a compressor constant to a table in lib.rs indexed by
the band consts, and Compressor::prepare takes the window - the compressor has
no business knowing which band it is.
rms_window_suppresses_low_frequency_ripple pins the property: the LOW window
holds 30 Hz under 1 dB, a 5 ms window is far worse on the same signal (so the
bound cannot pass for the wrong reason), ripple falls monotonically with window
length, and the HIGH band's short window stays clean at 5 kHz.
This changes how the plugin sounds in RMS mode - needs an ear, not just tests.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LU1NRL7fAaZTtFMTTPn2b1
Every sample ran 20 Smoother::next() calls and 4 db_to_gain_fast() - one set
per channel for pre-gain, makeup, mix, low slope and low curve - whether or not
anything was actually moving. Measured standalone at ~17 ns/sample, so roughly
8% of the chain, paid permanently for the rare case where a knob is in motion.
Params here only change on block boundaries (we do not split blocks on events),
so a smoother idle at the top of a block stays idle for that block. When every
smoother feeding a channel is idle - i.e. nobody is touching anything, which is
the overwhelming common case - its per-sample values are constants and lift out
of the loop. The moving case keeps the original per-sample path unchanged.
Unlike the true-peak early-out this is an always-on saving, not a
signal-dependent one.
Note this path has no automated coverage: process() needs a host to drive it,
so the DSP tests do not reach it. The logic is small and the moving case is
byte-for-byte the old code, but automation smoothing is worth an ear in FL
before trusting it - move a pre-gain or mix knob and listen for zipper.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LU1NRL7fAaZTtFMTTPn2b1
The polyphase evaluation is PHASES*TAPS_PER_PHASE multiply-adds per channel
(96 for stereo) on every sample, unconditionally, and measured as 42 ns/sample
- 17% of the whole chain, and the largest single item in it. It is also the
only part that is pure throughput rather than a serial dependency chain, which
makes it the one worth attacking.
It is skippable. The interpolator is linear, so over its FIR support
|true peak| <= peak_gain * max|history|, peak_gain = max_phase sum |c|
and when that bound sits under the ceiling the true peak provably cannot reach
it. The limiter's gain target would be 1.0 for that sample either way, so
feeding the sample peak instead cannot change the outcome - a genuinely loud
neighbour still gets caught by its own evaluation.
- oversampler: split max_true_peak into push (cheap, must run every sample or
the FIR history develops holes) and evaluate (the expensive half, skippable).
Expose peak_gain and SUPPORT_LEN so a caller can compute the bound.
- limiter: track the sample peak over the FIR support with the SlidingMax
already used for the look-ahead window, and skip evaluate when bounded under.
Measured, 48 kHz stereo:
limiter, quiet 0.1 (skips) 66 -> 31 ns/sample
limiter, hot 0.95 (always evaluates) 66 -> 72 ns/sample (no real change)
FULL CHAIN 232 -> 195 ns/sample
So this pays off on material that is not pinned to the ceiling and costs
nothing when it is. On a maximizer the hot case is common, so treat the win as
situational rather than a flat 16%.
evaluate_never_exceeds_peak_gain_bound asserts the bound directly against
adversarial input (full-scale square waves, impulses), since the whole
optimisation rests on it, and also asserts it is not vacuously loose.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LU1NRL7fAaZTtFMTTPn2b1
The template grew a considerably more thorough version of the checker this
repo seeded: vendor/email/homepage/description coverage, Rust type names,
CLAP_ID reverse-DNS validation, opt_check so a missing file skips instead
of failing, a git/find fallback so the stale scan cannot pass vacuously
outside a checkout, and a TODO scaffolding report. Take that body verbatim
rather than let two copies drift; fixes belong in the template first.
Three adaptations, all structural rather than stylistic:
- params structs live in src/params.rs here, not src/lib.rs
- CLAP_DESCRIPTION wraps onto a second line, so the const name and its
value never share one line; match the value alone
- STALE is seeded with this repo's CURRENT spellings. Each is skipped
while still canonical and arms the moment that value changes, so the
planned "codename 206" -> "206" rename checks itself: every spelling
left behind becomes a FAIL naming the files that still hold it.
28 passed, 0 failed, 8 skipped. Verified against drift, not just for a
green run: wrong params name, wrong CLAP_DESCRIPTION, and a simulated
rename each fail with exit 1.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LU1NRL7fAaZTtFMTTPn2b1
Found by reading the audio-thread code, not by profiling - no profiler is
set up in this project yet. All four are algorithmic or arithmetic wins,
none change the DSP result; the existing tests still pass.
- oversampler: max_true_peak recomputed its circular-history tap index
(including a % TAPS_PER_PHASE) inside the phase x channel loop, though
the index depends only on pos/k - 8x redundant. Hoisted to a per-sample
precomputed index array. This runs unconditionally every sample (it
feeds the limiter's true-peak detector, not gated by metering), so it
was the highest-value fix.
- limiter: the sliding-window max rescanned the entire look-ahead ring
(~73 samples at 48kHz/1.5ms) every sample - O(window) per sample.
Replaced with an O(1)-amortized monotonic-deque sliding max, backed by
preallocated ring arrays and RT-safe. Covered by a new test against a
naive brute-force reference. Also precomputed the constant true-peak
margin gain in prepare() instead of a powf every sample.
- compressor: replaced per-sample log10/powf(10, x/20) with the
equivalent ln/exp forms, mirroring nih-plug's own gain_to_db_fast /
db_to_gain_fast. Called 4x/sample (3 bands + 'All').
- both: replaced % capacity ring-index math (a real integer division,
since capacity is not a power of two) with a conditional-subtract
wrap_add helper. Left the oversampler's % TAPS_PER_PHASE alone - that
divisor is a compile-time constant LLVM already turns into a multiply.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LU1NRL7fAaZTtFMTTPn2b1
Branding is duplicated across Cargo.toml, bundler.toml, deploy.ps1 and
src/lib.rs with nothing keeping them in sync, so a rename drifts silently:
the bundle builds under one name while deploy.ps1 looks for another.
check-branding.sh declares the canonical identity once and asserts every
copy matches, including that VST3_CLASS_ID is exactly 16 bytes. A STALE
list catches leftovers of the old name after a rename. Portable POSIX sh
so it works on Windows (Git Bash) and Linux alike; .gitattributes pins
*.sh to LF so core.autocrlf=true cannot break the shebang.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LU1NRL7fAaZTtFMTTPn2b1
Add a per-channel input_level meter (post pre-gain, peak-with-decay) and use it
to shade the gain curve: a translucent fill under the curve from the floor up to
the current input, its right edge riding the curve (width = input, height =
output), plus a dot at the operating point. Add -6 dBFS reference lines on both
axes with a tick label.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rework Low Curve from a one-sided saturating bend into a bipolar mid-bulge: the
low region is anchored at BOTH the silence floor and the knee, Low Slope tilts
the straight line between them, and Low Curve (-1..1) bows that line in the
middle (4*t*(1-t), peak +/-12 dB) without moving either endpoint. Positive
bulges up (boost the quiet middle), negative down (suppress). Still serial.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a per-channel below-threshold shaper composed in series ahead of the comp:
gain = low_shape(level) + comp(level + low_shape(level)). The compressor's
threshold now sees the shaped level, so a Low Slope boost lifts quiet material
up into compression (and a cut pulls it out). Anchored at the -60 dB silence
floor. Low Curve bends the shaper toward a bounded saturation so the serial
composition doesn't blow up (0 = straight line).
gain_computer split into comp_gain_db + low_gain_db and composed; shared with
the editor gain-curve display. Slider order rearranged to read in signal order
(pre-gain -> low shaper -> compressor -> output). Defaults (slope 1, curve 0)
reproduce the plain compressor; 17 tests pass.
Known: the bipolar behaviour isn't final yet (milestone commit).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add editor/gain_curve.rs: a square panel beside the scrolling plot showing the
channel transfer (out vs in, -60..0 dB) for whichever channel the plot tab
selects. Plots the full wet path — out = (in + pre_gain) + gain_reduction + makeup
— using the shared Compressor::gain_computer (now pub) so it matches the DSP and
the GR meter. Unity-reference diagonal + threshold marker; mix not folded in.
Update README structure/status to reflect the editor/ widget module and the
completed Stage 6 visualisers.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Flag each plot bucket with whether the output limiter hit the ceiling
(limiter GR > 0.1 dB), carried through ScopeRing as a per-bucket hit field and
folded into history columns. The editor draws a short red tick at the top of any
hit column (one column wide, so runs merge into segments and a lone hit is a
dot); nothing otherwise. Global marker, shown on every channel tab.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the per-channel bypass toggle with a smoothed dry/wet `mix` (0..100%,
default 100%). The blend is applied at the compressor output:
out = delayed_input * ((1 - mix) + mix * wet_gain)
Dry and wet share the same delayed input, so it's phase-aligned (parallel
compression, no comb filtering). mix=0 is bit-identical to the old bypass.
The detector now runs even at mix 0, so the GR meter shows the wet gain
reduction regardless of mix, while the level/plot out trace reads the mixed
output. "Bands at 0% = simple full-band comp via All" still holds.
Update README + parameter docs (bypass -> mix).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the two plain crossover sliders with a horizontal log-frequency strip
(LOW/MID/HIGH) and two draggable handles, plus number boxes (double-click to
type). Handles and boxes enforce a dynamic limit so lo/mid never crosses
mid/hi, on top of each param's own range. Lives in the editor/ widget module.
Known limitation: the lo<=hi limit is editor-only, so host automation can write
the two params past each other (briefly inverting the mid band). The DSP clamps
to monotonic, but FL's automation can misbehave once inverted. Left as-is.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
FL keeps calling process() with silence while stopped/paused, so the scope
scrolled silence instead of holding. Gate the plot's bucket advance on
context.transport().playing, so it freezes on stop/pause and resumes on play.
Bar meters still fall to silence as before. Update README thread-safety notes
for the ScopeRing feed and transport gating.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Feed the scrolling plot from a lock-free SPSC ScopeRing instead of sampling one
atomic per egui frame, so horizontal resolution is set by the audio-clocked
bucket rate (~200 Hz) rather than the ~60 fps repaint. process() accumulates a
bucket every sample_rate/BUCKET_HZ samples (peak-preserving, spanning blocks)
and pushes it; the editor drains all new buckets each frame and folds them into
PLOT_N columns. Fast transients between frames are no longer dropped, and the
plot is now audio-clocked (freezes on pause, falls to silence on stop/reset).
Drop the per-frame plot_* atomics (the per-channel lamp now reads the decayed
bar level). Also fix the area fill: render it as a strip of per-segment convex
quads instead of one concave polygon, which egui fan-filled from a corner and
left stray triangles.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Draw a translucent area from each level line down to the plot baseline so the
input and output traces read more clearly. The gain-reduction trace stays a
plain line (it hangs from the 0 dB line, where a fill would read oddly).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the single global ceiling lamp with one lamp per channel cluster.
Each latches when that channel's output reaches 0 dBFS (a hot/over warning,
handy when pre-gain drives a band); the ALL channel additionally lights on a
real output-limiter catch. Same latch/hold/click-to-clear behavior, now per
channel.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Move the egui editor from a single editor.rs into an editor/ module: mod.rs
(aggregator: create(), EditorState, layout, placeholder slider columns),
meter.rs (|L|GR|R| meters + ceiling lamp, owns MeterState), and plot.rs
(rolling in/out/GR plot, owns PlotState + PlotHistory). Each visualiser owns
its GUI state; the aggregator composes them. No behavior change.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Keep the widget-module breakdown (meter/plot/gain_curve/crossover) documented
as the intended split for when editor.rs is redesigned, clearly marked as
deferred rather than current.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reflect actual code: per-channel pre-gain drive in signal flow + params,
makeup range -24..+24, lib.rs split into params/editor/meters, lock-free
atomic meters (not a mutex), and Stage 6 progress (|L|GR|R| meters, latching
ceiling lamp, rolling in/out/GR plot). Overview/Goals unchanged.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Meters: per-channel |L | GR | R| layout (narrower bars). Ceiling lamp now
latches on a limiter catch and holds, clearing after 3s or on click.
Plot: per-channel selectable scrolling in/out/gain-reduction scope under the
meters, fed by new raw block-peak atomics (separate from the decayed bar
atomics). Histories for all four channels run continuously, so switching tabs
keeps each channel's history. Scroll is time-based with a flow-speed selector
(2/5/15/45 s window) so the window length is accurate regardless of frame rate,
with peak-preserving downsampling between columns.
reset() now zeroes the meters so transport restart shows silence rather than
stale values.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Extend the per-channel makeup range floor from -12 to -24 dB so makeup can
attenuate as well as boost, giving more post-compressor gain-staging headroom.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The script only checked the VST3 existed, so a plugin loaded in the DAW (which
locks its binary and makes the copy fail silently) left a STALE install that
passed verification. Compare install vs build timestamps for both formats and
warn when stale ("loaded in your DAW").
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Stage 6 begins. Add lock-free Meters (atomics shared audio->GUI) with a
peak-with-decay ballistic, published once per block and gated on the editor
being open. Editor draws a per-channel level + gain-reduction meter panel and
a ceiling lamp fed by the output limiter. Compressor/Limiter expose
gain_reduction_db() for this.
Also add a smoothed per-channel pre-gain applied before each compressor (and
before the All compressor), driving the signal into compression and on into
the limiter for a compressed semi-distortion. Pairs with makeup for full
per-channel input/output gain-staging. Compressor DSP untouched; 16 tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Move parameter structs, defaults, and build_settings into src/params.rs;
move the egui editor into src/editor.rs. lib.rs now holds only the plugin
shell, DSP wiring, and process(). No behavior change (16/16 tests pass).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Upgrades the brickwall limiter from sample-peak to true-peak (inter-sample).
- src/dsp/oversampler.rs: 4x polyphase windowed-sinc (4 phases x 12 taps, Blackman,
each phase normalized to unity DC). Detection-only: max_true_peak() returns the
inter-sample max magnitude and discards the upsampled samples; the audio path is
untouched. Built in prepare(), no realtime allocation. Cost ~ one base-rate FIR
per channel; its small group delay is absorbed by the limiter look-ahead, so no
added reported latency.
- src/dsp/limiter.rs: detector peak = max(sample_peak, oversampler.max_true_peak());
targets a 0.3 dB margin under the ceiling to cover the 4x detection residual.
- 16 unit tests (2 new: detects ~3 dB fs/4 inter-sample overshoot; preserves DC
amplitude). README/docs updated: Stage 4 complete.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The global controls were one non-wrapping horizontal row that pushed Ceiling off
the right edge, and the window was fixed-size, so some controls (Ceiling, the full
'All' column) couldn't be reached. Wrapped the editor in a ResizableWindow, moved
the global controls into a vertical label|slider grid, and put everything in a
vertical ScrollArea. Placeholder layout still (Stage 6 replaces it), just usable.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds the output limiter stage after the 'All' channel. Guarantees the output
never exceeds the ceiling: fixed 1.5 ms look-ahead, stereo-linked sliding-max
peak detection over the look-ahead window -> gain = ceiling/window_max, decoupled
smoothing (fast attack / user release), and a final clamp as the hard guarantee.
- src/dsp/limiter.rs: Limiter (sample-peak; true-peak via oversampling is 4b)
- src/lib.rs: wired as final stage; new globals output_ceiling_db (-24..0) and
limiter_release_ms; latency now the constant three-stage total (bands+All+limiter);
two UI sliders added to the global row
- 14 unit tests (4 new: ceiling guarantee on spikes, loud-sine limiting,
transparency below ceiling, latency)
- README/docs updated (Stage 4 split into 4a done / 4b oversampling)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
CLAP shows name/vendor/type correctly in FL; VST3 still shows stale/missing
metadata (suspected FL caching by the unchanged VST3_CLASS_ID). Deferred — use
CLAP meanwhile; likely fix is regenerating the class ID and/or clearing FL's DB.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Investigated the planned global FTZ for the IIR filters and found NIH-plug already
handles it: process_wrapper wraps process()/reset() in a ScopedFtz guard that
enables CPU Flush-To-Zero (x86 MXCSR bit 15 / AArch64 FPCR bit 24, via inline asm,
restored on drop) on the vst3, clap, and standalone paths. SSE is baseline on
x86_64 so FTZ is always active for our build.
So adding our own guard would just duplicate the framework. Instead, removed the
now-redundant flush_denormal() from compressor.rs (the biquads and envelope/RMS
tails already relied on this FTZ) for a single consistent story, and rewrote the
README 'Denormal flushing' note to document that the framework handles it (FTZ,
not DAZ — sufficient for our feed-forward IIR).
No functional change; 10 unit tests still pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Splits the input into low/mid/high with a Linkwitz-Riley 24 dB/oct crossover,
compresses each band, sums them, then runs the sum through a fourth 'All'
compressor. Bypassing the three bands collapses the plugin to a simple full-band
comp driven by 'All' (the crossover sums flat in magnitude).
- src/dsp/biquad.rs: generic RBJ biquad (Transposed Direct Form II), LP/HP/AP
- src/dsp/crossover.rs: 3-band LR4 filterbank; lower band all-pass-compensated at
the higher crossover so the bands sum to flat magnitude (an all-pass, not a
bit-exact null — that only holds for linear-phase FIR). Mirrors nih-plug's
crossover plugin design.
- src/lib.rs: 4 Compressor instances (low/mid/high/all) + Crossover; params
restructured to 4 nested CompressorParams (id_prefix low/mid/high/all) plus
global crossover_low_hz/crossover_high_hz/look_ahead_ms; 4-column lo|mid|hi|all
egui UI; latency = two series stages (bands + all), constant, reported once
- 10 unit tests (adds biquad LP/AP magnitude, crossover flat-magnitude
reconstruction, band-split sanity)
- README: Stage 3 marked done; corrected the 'sum flat' expectation to flat
magnitude (IIR LR sums to an all-pass, not a time-domain null)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Compressor: switchable peak / RMS detection (EnumParam<DetectionMode> in lib.rs
-> use_rms bool in CompressorSettings; DSP stays framework-agnostic). RMS is a
one-pole running mean of the linked squared level with a hardcoded 5 ms window,
updated whenever active so peak<->RMS switching is seamless. New unit test
(RMS compresses a sine less than peak); 6 tests total.
- README: reconciled Implementation Order checklists with actual progress
(Stages 1-2 done; look-ahead/latency + basic UI pulled forward), annotated the
project structure (implemented vs planned), and corrected the Latency and
Denormal-flushing notes to match the code (set_latency_samples once / constant
latency; in-code denormal flush). Overview and goals left unchanged.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Implements the single full-band feed-forward compressor (the engine that will be
reused per band + for the 'All' channel). Design follows Giannoulis et al. 2012:
log-domain gain computer with a quadratic soft knee feeding a smooth decoupled
peak detector for attack/release ballistics. Stereo-linked peak detection.
Look-ahead uses a fixed audio delay with a constant reported latency (set once in
initialize); the knob only moves the detector tap within that delay. This avoids
renegotiating latency from process(), which crashed FL Studio when the look-ahead
was adjusted during playback.
- src/dsp/compressor.rs: Compressor + CompressorSettings, RT-safe (no alloc in
process; buffers sized in prepare; envelope denormals flushed in-code)
- src/lib.rs: nested CompressorParams (threshold/ratio/knee/attack/release/makeup/
bypass) + global look-ahead; egui ParamSlider grid; latency reported once
- 5 unit tests (static curve, knee continuity, steady-state convergence, constant
latency); Cargo.toml lib crate-type added so tests link
- README: 'All' channel architecture already documented; look-ahead spec updated
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Mikkeli Matlock
mikkeli
irene