iperf3-gui/tool/setup_ci_runner.sh

#!/usr/bin/env bash
# Provision this machine as a Gitea Actions runner for the android-stuff org.
#
#   sudo ./tool/setup_ci_runner.sh --check      # pre-flight only, changes nothing
#   sudo RUNNER_TOKEN=xxxx ./tool/setup_ci_runner.sh
#
# Get an ORG-scoped token from
#   <gitea>/org/android-stuff/settings/actions/runners → "Create new runner"
# Org scope, not repo scope, so every android-stuff repo shares one runner.
#
# ── WHY THIS MACHINE, NOT THE GITEA HOST ────────────────────────────────────
# Gitea runs on an aarch64 box. Flutter cannot build an Android APK on a Linux
# arm64 host at all: the SDK ships no arm64-host gen_snapshot
# (flutter/flutter#189724, #75864, open as of July 2026). An x86_64 runner is a
# requirement here, not a preference.
#
# ── WHY HOST MODE, NOT A CONTAINER ──────────────────────────────────────────
# This machine has a working Flutter + Android SDK + NDK. In host mode jobs use
# it directly, so CI builds with the same toolchain that produced the verified
# release and skips a per-run NDK download. The cost is that there is no
# container boundary — which is exactly why the service account below matters.
#
# ── WHY A DEDICATED USER, AND A SYSTEM SERVICE ──────────────────────────────
# Host mode means the service account IS the sandbox; there is no other. A
# workflow file is code, and it runs as whoever this service runs as. Running
# as a human user would give every workflow read access to that user's home,
# SSH keys included. Running as root would be worse, and would also miss the
# warm Gradle/pub caches in that home (HOME=/root), re-downloading dependencies
# every run for no benefit.
#
# So: a dedicated unprivileged account, in the flutterdev group for SDK access,
# with its own HOME so its caches are its own. A *system* service rather than a
# user service, so it starts at boot under plain systemctl with no lingering
# session — the service being root-managed is unrelated to the jobs being
# unprivileged, and conflating those two was the earlier mistake here.

set -euo pipefail

VERSION="${RUNNER_VERSION:-3.3.0}"
INSTANCE="${GITEA_INSTANCE:-http://pi5-16.local:3005}"
RUNNER_USER="${RUNNER_USER:-gitea-runner}"
SDK_GROUP="${SDK_GROUP:-flutterdev}"
RUNNER_HOME="${RUNNER_HOME:-/var/lib/gitea-runner}"
BIN="${RUNNER_BIN:-/usr/local/bin/gitea-runner}"
UNIT="/etc/systemd/system/gitea-runner.service"
RUNNER_NAME="${RUNNER_NAME:-$(hostname)-android}"

# Capability label, deliberately not a hostname: it says what the runner can
# do, so a workflow does not encode which machine happens to provide it.
LABEL="${RUNNER_LABEL:-flutter-android}"

CHECK_ONLY=0
[[ "${1:-}" == "--check" ]] && CHECK_ONLY=1

[[ $EUID -eq 0 ]] || { echo "Run with sudo: sudo RUNNER_TOKEN=... $0" >&2; exit 1; }
# --check is for validating this machine before committing to anything, so it
# deliberately does not require a token.
if [[ $CHECK_ONLY -eq 0 ]]; then
    : "${RUNNER_TOKEN:?set RUNNER_TOKEN to an org registration token (see header)}"
fi

say() { printf '\n==> %s\n' "$1"; }

# ── Pre-flight, before anything is created ─────────────────────────────────
say "Pre-flight"
missing=0
for cmd in flutter dart java cmake ninja node git unzip curl; do
    # Resolved from systemd's own PATH, not an interactive shell's, since that
    # is what the service will actually have.
    if PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin \
        command -v "$cmd" >/dev/null; then
        printf '  ok       %s\n' "$cmd"
    else
        printf '  MISSING  %s (not on systemd default PATH)\n' "$cmd"
        missing=1
    fi
done

SDK="${ANDROID_HOME:-${ANDROID_SDK_ROOT:-/opt/android-sdk}}"
for d in "$SDK/ndk" "$SDK/build-tools" "$SDK/platforms"; do
    [[ -d "$d" ]] && printf '  ok       %s\n' "$d" \
        || { printf '  MISSING  %s\n' "$d"; missing=1; }
done
getent group "$SDK_GROUP" >/dev/null \
    && printf '  ok       group %s\n' "$SDK_GROUP" \
    || { printf '  MISSING  group %s\n' "$SDK_GROUP"; missing=1; }

if [[ $missing -ne 0 ]]; then
    echo
    echo "Refusing to register: a runner advertising '$LABEL' must actually" >&2
    echo "provide these, or every job fails confusingly instead of here." >&2
    exit 1
fi

if [[ $CHECK_ONLY -eq 1 ]]; then
    say "Pre-flight passed"
    echo "  Nothing was created. Re-run with RUNNER_TOKEN set to provision."
    echo "  Note: SDK write access is verified as $RUNNER_USER, which can only"
    echo "  be checked once that account exists — so it is not covered here."
    exit 0
fi

# ── Service account ────────────────────────────────────────────────────────
say "Service account: $RUNNER_USER"
if id "$RUNNER_USER" &>/dev/null; then
    echo "  exists; ensuring membership of $SDK_GROUP"
    usermod -aG "$SDK_GROUP" "$RUNNER_USER"
else
    # --shell /bin/bash, not nologin: host-mode steps are executed as shell
    # scripts, and a login shell costs nothing here — the account has no
    # password, so it is only reachable via root anyway.
    useradd --system \
            --create-home --home-dir "$RUNNER_HOME" \
            --shell /bin/bash \
            --groups "$SDK_GROUP" \
            --comment "Gitea Actions runner ($LABEL)" \
            "$RUNNER_USER"
    echo "  created"
fi
install -d -o "$RUNNER_USER" -g "$SDK_GROUP" -m 0750 \
    "$RUNNER_HOME" "$RUNNER_HOME/workspace"
id "$RUNNER_USER"

# Group membership is worthless if the ACLs disagree, so prove it rather than
# assume it — as the service user, against the paths a build actually writes.
say "Verifying $RUNNER_USER can write the SDKs"
acl_ok=1
for d in "/opt/flutter/bin/cache" "$SDK"; do
    if sudo -u "$RUNNER_USER" test -w "$d"; then
        printf '  ok       writable: %s\n' "$d"
    else
        printf '  FAIL     not writable: %s\n' "$d"
        acl_ok=0
    fi
done
if [[ $acl_ok -ne 1 ]]; then
    echo
    echo "$RUNNER_USER is in $SDK_GROUP but still cannot write. Check the ACLs:" >&2
    echo "  getfacl /opt/flutter /opt/android-sdk" >&2
    exit 1
fi

# ── Binary ─────────────────────────────────────────────────────────────────
say "Installing gitea-runner $VERSION"
if [[ -x "$BIN" ]] && "$BIN" --version 2>/dev/null | grep -qF "$VERSION"; then
    echo "  already at $VERSION"
else
    url="https://dl.gitea.com/gitea-runner/${VERSION}/gitea-runner-${VERSION}-linux-amd64"
    echo "  $url"
    curl -fSL --retry 3 -o "$BIN.tmp" "$url"
    chmod 0755 "$BIN.tmp"
    mv "$BIN.tmp" "$BIN"
fi
"$BIN" --version

# ── Config ─────────────────────────────────────────────────────────────────
say "Config"
CONFIG="$RUNNER_HOME/config.yaml"
if [[ -f "$CONFIG" ]]; then
    echo "  $CONFIG exists, leaving it alone"
else
    cat > "$CONFIG" <<YAML
log:
  level: info

runner:
  file: .runner
  # One at a time: a 2-ABI NDK compile plus Gradle will saturate this box, and
  # concurrent jobs would only contend for it.
  capacity: 1
  timeout: 45m
  # ':host' runs steps directly on this machine as ${RUNNER_USER}, using the
  # toolchain verified in pre-flight, rather than in a container that would
  # have to fetch its own.
  labels:
    - "${LABEL}:host"

container:
  # Unused in host mode. Kept so switching to container mode later is an edit
  # rather than a rediscovery — it would need the Docker network that the
  # Gitea host's own runner also needs.
  network: ""
  privileged: false

host:
  workdir_parent: ${RUNNER_HOME}/workspace
YAML
    chown "$RUNNER_USER:$SDK_GROUP" "$CONFIG"
    chmod 0640 "$CONFIG"
    echo "  wrote $CONFIG"
fi

# ── Registration ───────────────────────────────────────────────────────────
say "Registering with $INSTANCE"
if [[ -f "$RUNNER_HOME/.runner" ]]; then
    echo "  already registered ($RUNNER_HOME/.runner) — skipping."
    echo "  To re-register: delete that file AND remove the runner in Gitea."
else
    sudo -u "$RUNNER_USER" HOME="$RUNNER_HOME" \
        "$BIN" register \
            --no-interactive \
            --instance "$INSTANCE" \
            --token "$RUNNER_TOKEN" \
            --name "$RUNNER_NAME" \
            --labels "${LABEL}:host" \
            --config "$CONFIG"
    # register writes .runner into the cwd it was given; make sure it landed.
    [[ -f "$RUNNER_HOME/.runner" ]] || {
        echo "  registration produced no .runner in $RUNNER_HOME" >&2
        exit 1
    }
fi

# ── Service ────────────────────────────────────────────────────────────────
say "systemd unit"
cat > "$UNIT" <<UNITFILE
[Unit]
Description=Gitea Actions runner (${LABEL}, host mode)
Documentation=https://gitea.com/gitea/act_runner
After=network-online.target
Wants=network-online.target

[Service]
Type=simple
User=${RUNNER_USER}
Group=${SDK_GROUP}
WorkingDirectory=${RUNNER_HOME}
ExecStart=${BIN} daemon --config ${CONFIG}
Restart=always
RestartSec=5

# HOME must be explicit: it decides where Gradle and pub put their caches, and
# a service does not inherit a login environment.
Environment=HOME=${RUNNER_HOME}
Environment=GRADLE_USER_HOME=${RUNNER_HOME}/.gradle
Environment=PUB_CACHE=${RUNNER_HOME}/.pub-cache
Environment=ANDROID_HOME=${SDK}
Environment=ANDROID_SDK_ROOT=${SDK}

[Install]
WantedBy=multi-user.target
UNITFILE
echo "  wrote $UNIT"

systemctl daemon-reload
systemctl enable --now gitea-runner
sleep 2
systemctl --no-pager --lines=15 status gitea-runner || true

cat <<EOF

==> Done.

    Logs:    journalctl -u gitea-runner -f
    Stop:    systemctl stop gitea-runner
    Remove:  systemctl disable --now gitea-runner
             rm $UNIT $BIN && rm -rf $RUNNER_HOME
             userdel $RUNNER_USER
             ...and delete the runner in the Gitea org settings.

    The runner should now appear under
      ${INSTANCE}/org/android-stuff/settings/actions/runners
    with label '$LABEL'. The queued run for this repo should start on its own.

    First Android build will be slow: this account's Gradle and pub caches
    start empty by design. Subsequent runs reuse them.
EOF