diff --git a/deploy/yukart-decoder.service b/deploy/yukart-decoder.service
index f188026..415b438 100644
--- a/deploy/yukart-decoder.service
+++ b/deploy/yukart-decoder.service
@@ -1,6 +1,6 @@
 [Unit]
 Description=Yukart decoder: the car's broadcast CAN frames to named signals on the bus
-Documentation=gitea:yukart/svc-core
+Documentation=http://pi5-16:3005/yukart/svc-core
 # Tier 2. Ordered after the broker and nothing else: the adapter comes and goes, and
 # the decoder reopens the interface by itself. It only reads the bus.
 After=mosquitto.service
diff --git a/deploy/yukart-gnss.service b/deploy/yukart-gnss.service
index 01fc934..a6d9188 100644
--- a/deploy/yukart-gnss.service
+++ b/deploy/yukart-gnss.service
@@ -1,6 +1,6 @@
 [Unit]
 Description=Yukart gnss: the receiver's fix on the bus, as single values
-Documentation=gitea:yukart/svc-core
+Documentation=http://pi5-16:3005/yukart/svc-core
 # Tier 2. Ordered after the broker and gpsd; it reconnects to either by itself.
 After=mosquitto.service gpsd.service
 StartLimitIntervalSec=0
diff --git a/deploy/yukart-imu.service b/deploy/yukart-imu.service
index 959262f..764718d 100644
--- a/deploy/yukart-imu.service
+++ b/deploy/yukart-imu.service
@@ -1,6 +1,6 @@
 [Unit]
 Description=Yukart imu: the WT61 on a USB-UART adapter, as the car's motion on the bus
-Documentation=gitea:yukart/svc-core
+Documentation=http://pi5-16:3005/yukart/svc-core
 # Tier 2. Ordered after the broker and nothing else: it finds the adapter by itself,
 # whenever it appears.
 After=mosquitto.service
diff --git a/deploy/yukart-obd-poller.service b/deploy/yukart-obd-poller.service
index 0f1ac86..7242493 100644
--- a/deploy/yukart-obd-poller.service
+++ b/deploy/yukart-obd-poller.service
@@ -1,6 +1,6 @@
 [Unit]
 Description=Yukart obd-poller: OBD-II over the K-line through the Bluetooth ELM327
-Documentation=gitea:yukart/svc-core
+Documentation=http://pi5-16:3005/yukart/svc-core
 # Tier 2. Ordered after the broker and Bluetooth: the adapter comes and goes, and the
 # poller connects, releases and retries by itself.
 After=mosquitto.service bluetooth.service
diff --git a/deploy/yukart-orin-status.service b/deploy/yukart-orin-status.service
index acf3475..3a26b9a 100644
--- a/deploy/yukart-orin-status.service
+++ b/deploy/yukart-orin-status.service
@@ -1,6 +1,6 @@
 [Unit]
 Description=Yukart orin-status: the Orin's own health on the bus
-Documentation=gitea:yukart/svc-core
+Documentation=http://pi5-16:3005/yukart/svc-core
 # Tier 2. Ordered after the broker and nothing else; it reconnects by itself if the broker restarts.
 After=mosquitto.service
 StartLimitIntervalSec=0
diff --git a/deploy/yukart-recorder.service b/deploy/yukart-recorder.service
index 6ec7389..5cfff74 100644
--- a/deploy/yukart-recorder.service
+++ b/deploy/yukart-recorder.service
@@ -1,6 +1,6 @@
 [Unit]
 Description=Yukart recorder: raw CAN and GNSS sessions to disk
-Documentation=gitea:yukart/svc-core
+Documentation=http://pi5-16:3005/yukart/svc-core
 # Tier 1, ordered after nothing: CAN adapter and gpsd come and go, and the
 # recorder waits for them itself rather than through unit dependencies.
 StartLimitIntervalSec=0